RHINO^® 3x3 Printed Gazebo

3x3 Custom Printed Gazebo

The RHINO® 3x3 Printed Gazebo is our most popular outdoor exhibition tent. The 3m x 3m customised gazebo provides a branded presence for outdoor events, exhibitions, fairs, trade shows and festivals whilst providing shelter (rain or shine) for approximately 9 people. 

The height-adjustable tent frame has four height settings allowing you to adapt your exhibition tent to suit your display and event needs. Standing at 3355mm tall on the highest setting it provides high-level branding that can be seen from across the event. 

Easy Assembly:
RHINO® tents can be fully assembled by two people in less than 10 minutes without any tools. The scissor frame expands and clicks into place and the printed canopy is held in position with Velcro corners and roof ties.

Printed walls are attached with tough Velcro straps along the top and Velcro tabs down each side which connect it to the frame legs. Full walls also feature zips which means you can fully enclose all sides of the tent for better security. Half walls are connected via a mounting bar that spans across the tent and connects to the legs providing support for the graphic. They also have Velcro tabs down each side of the printed graphic which connect to the legs. 

A tensioning crank is located at the centre of the frame roof and should be turned to raise the center roof support. This adds height and tension to your pitched gazebo roof making your branding more visible and your overall finish more professional. 

Commercial-Grade Custom Printed Gazebo:
Manufactured from a high-grade aluminium frame with 40mm hexagonal frame legs and a 1.1mm scissor-action roof. Each leg has a steel support foot with three anchor holes that should be used to peg down the event tent when used outside on soft ground. When using outdoors we recommend adding the 7.5kg gazebo weights, one per leg, to ensure adequate stability. In addition, we supply a set of guy-ropes that should be used in conjunction with tent pegs and weighted bases. When properly anchored, the RHINO® 3x3 printed gazebo can withstand wind speeds up to 13-18 mph/21-29 kph, Beaufort scale 4. 

Portable Wheeled Bag:
The 3m x 3m promotional gazebo is supplied with a wheeled transport bag to aid storage and transportation between events. No heavy lifting is required, simply put the carry bag over the collapsed frame like a sock, and zip up at the bottom before wheeling the bag away to the next event. A handle located at the top of the bag means effortless manoeuvrability with no infringement on Health and Safety regulations.

Printed Pop Up Gazebo:
RHINO® 3x3 Printed Gazebo includes aluminium frame, wheeled bag, tent peg and guy rope set and a custom printed canopy valance as standard. You can further customise your promotional tent by adding printed full walls and half walls to create a pop-up shop or branded marquee. 

Single and double-sided walls are available. Single-sided walls will have show-through on the reverse whilst double-sided print can have two printed sides with no show-through. Branded walls can be positioned on any of the four walls and are interchangeable to create a different layout. If you are opting for single-sided walls, please advise if you want your printed side facing inwards, or outwards at the time of ordering.

Dye-Sublimation Printing:
We use a 600d Oxford Polyester fabric which is an incredibly tough and durable textile designed for outdoor tents. Each gazebo graphic is dye-sublimation printed for a pin-sharp finish with vivid print detail and is finished with a PU coating making the tent fabric waterproof and UV fade-resistant providing years of reliable use.  For better protection, the roof features an extra lining that covers the canopy stitching better preparing it for wet weather. 

Why Buy RHINO® 3x3 Printed Gazebo?

• 3m x 3m promotional gazebos
• Fully customisable event tent - Build your own gazebo 
• Wheeled bag for portability 
• 4x tent pegs and guy ropes included
• Optional 7.5kg gazebo weights available - recommended 
• Weatherproof and UV-resistant branded canopy valance and walls
• Heavy-duty commercial-grade branded gazebo
• Dye-sublimation printing for durable & longer lasting event tents
• Suitable for wind between 13-18 mph/21-29 kph / Beaufort scale 4
• 40mm Hexagonal aluminium frame with tool-free assembly
• Quick-release clips to collapse the frame
• Graphic Design Service available
• Single or double sided printed walls are available
• Provides shelter for upto 9 people standing
• Buy the RHINO® Tent Graphic Bag for safely transporting printed gazebo graphics
• 2 year warranty

For more information on our Printed Gazebos please contact us or call our team on 01733 511030.

View our complete range of Branded Gazebos.